Our Roadie Bar Lever Kit is designed to mount in the drops of your road drop style handlebars, turning your Cyclocross or Gravel bike into the ultimate rig. Whether getting the saddle out of your way during descents in your local CX race series or providing a little needed relief during a long gravel road ride, we now have the answer for you.
Drop it on your drop bar
Lifetime Warranty
We've always got
your back
Fast Shipping Options
Get your parts for the
weekend ride
Unparalleled Service
Seriously, we're here
for you
Pacific NW Approved
All Season reliability, tested in the mountains
How Does Travel Adjust work?
Our travel adjust system allows for a total of 30mm travel reduction in 5mm increments. If you were riding that line between travel sizes you can now fine-tune the perfect fit by following the easy directions below:
- Begin by lowering your dropper at or below the desired travel length (just make sure it’s not fully extended!)
- Unthread the midcap with your hand and slide it up to reveal the white DU Bushing.
- You’ll see negative numbers with corresponding notches machined into the post (each # represents decreasing travel.
- Slide the DU bushing up and rotate it to align the black arrow with the amount of travel you would like to reduce, then seat the arrow into the machined groove. (Make sure it’s fit securely into these notches!)
- After pushing the DU Bushing back down, lower the midcap and hand tighten (no need to go overboard!) and ride off into the sunset with the perfect travel for you.
How Does Travel Adjust work?
Our travel adjust system allows for a total of 30mm travel reduction in 5mm increments. If you were riding that line between travel sizes you can now fine-tune the perfect fit by following the easy directions below:
- Begin by lowering your dropper at or below the desired travel length (just make sure it’s not fully extended!)
- Unthread the midcap with your hand and slide it up to reveal the white DU Bushing.
- You’ll see negative numbers with corresponding notches machined into the post (each # represents decreasing travel.
- Slide the DU bushing up and rotate it to align the black arrow with the amount of travel you would like to reduce, then seat the arrow into the machined groove. (Make sure it’s fit securely into these notches!)
- After pushing the DU Bushing back down, lower the midcap and hand tighten (no need to go overboard!) and ride off into the sunset with the perfect travel for you.
Specs: Drop Bar LEver kit
compatibility
Works with cable actuated droppers
clamp
Designed for 24mm diameter road bars
kit includes
Cable and housing
Manuals
levers
drop bar lever kit
Warranty
PNW Lifetime Warranty
Do we have your back? Of course. If anything goes wrong, we're here to do everything we can to ensure you're taken care of.